Brother Printer Setup

How To Connect Brother Printer to Wi-Fi. Check This Guide for straightforward Steps

In this article, we have a tendency to square measure reaching to justify the method to connect brother printer to Wi-Fi. Thereafter, we are going to justify the steps to form a wireless affiliation of your Brother printer along with your Windows or Macintosh device. 

For your Brother printer to figure wirelessly, you wish to place your printer and pc on the same LAN network. Hence, we are going to be explaining the method for this within the following section. 


Before we tend to begin the method, to attach brother printer there are a few things we’d like to see –

  • First of all, establish your LAN network name. 
  • Also, notice your network key for your LAN (also referred to as “Password”).
  • Write down somewhere the SSID and Arcanum of your LAN router as you’ll be needing that. 


Steps to be told however Do  Connect Brother Printer to LAN Network


First, activate your LAN router and make certain you place your printer among the LAN network vary. 

Then, connect the ability twine of Brother printer to socket and create flip it on.

Next click on the “Menu” button placed on your Brother printer.

Using the up and down arrow key, choose the “Network” choice and click on on “OK” button.

Hit on the up and down arrow key to decide on “WLAN” and click on on “Ok”

Select “Setup Wizard” choice by expenditure and Down key then click on “Ok” once more.

When you see the “Wi-Fi enable” option, press “Yes” on that. currently, Brother printer can mechanically hunt for the wireless network from the out there list.

Select your LAN network name from the list and press “Ok”.

Next, it’ll elicit the LAN Arcanum. Enter your correct Arcanum and press “Ok”. 

This will complete the method of connecting Brother printer to LAN network.

So, on top of these steps to attach brother printer to LAN after you face the difficulty of not connecting to LAN use these easy steps moreover.


How to Connect Brother Wireless (Wi-Fi) Printer to Windows pc


The answer to your question of “How do I connect my Brother wireless printer to Windows laptop computer or computer” is given as below- 

Firstly, activate your Brother printer and connect it to your LAN network by following the steps given in on top of the section. 

Then, visit the website to transfer the driver for your Brother printer for your Windows pc.

Search your Brother printer’s model and click on the “Download Driver” choice as per your Windows compatibility.

Now, driver installation can begin on your pc. anticipate it to complete. 

Click on the downloaded driver file to open it. Thereafter, end the installation setup method by following on-screen directions. 

Then, open the “Run Command” from your Windows begin menu and kind “Control Panel” within the dialogue box and click on “Ok”.

From the panel, choose the “Device and Printer” choice.

After this hit on the “Add a printer” choice then choose your Brother printer from the list and click on “Next”.

Wait for some moments to finish your setup. 

Finally, currently, affiliation has been established between your brother Wi-Fi setup and your Windows pc.


If you are still facing issues while connecting brother printer to Wi-Fi. then contact direct hp customer service or hp printer support or call toll free 18009370172.